The MPPT Control lets you see the status and setup all MPPTs that use a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment.
The MPPT Control starts up in the ‘Live View’, which shows the nine most important values of the MPPT Solar charge controller, such as ‘solar panel power’, ‘today’s yield’, ‘voltages’ & ‘currents’, as well as ‘charge state’ and ‘load state’.
Other information such as the historical values of the MPPT can be accessed by pressing ‘select’. All-time values like ‘total yield’ and other valuable information such as ‘maximum solar panel voltage’, ‘maximum & minimum battery voltage’ can also be viewed, as well as the last 4 errors. All that stored information from your MPPT can be selected and viewed with the MPPT Control. Within the 30-day history besides common information like ‘daily yield’, ‘minimum & maximum voltages and currents’, important information about the length of charge stages such as ‘bulk, absorption & float’ during a specific day can also be shown. With such extensive information the user can gain a considerable insight into their system.
If the MPPT Control is connected to a MPPT that shuts down at night, the MPPT Control can be connected to a battery using the supplied cable. This way, the MPPT Control stays powered while the MPPT is off and the last received status, history and settings of the MPPT can be viewed.